Carvin MTS3200 Head Gitarsko lampaško pojačalo
Channel 1 Lead controls include Treble, Mid, Bass, Drive (gain), and channel volume.
Channel 2 Clean controls include Treble, Mid, Bass, Drive, and volume. There is also a push-button presence switch for the Clean channel.
The front panel houses two additional controls; a global Reverb control that affects both channels, and a Lead 1 Presence knob that selects the Lead channel's presence frequency.
On the back of the amp you'll find the usual suspects; a bias switch for selecting 6L6/5881 power tubes (which ship with the amp) or EL34s.
A switch to select cab impedance (4, 8, or 16 ohms) is included along with the two speaker-out jacks.
Send and Return jacks for the great sounding serial effects loop are found here as well. The loop can be switched on or off via the included footswitch.
A very handy and smart feature of this amp is that the output power can be cut down to 50 watts via a switch on the rear panel, which will keep your neighbors and FOH soundman happy! (it should be noted that the impedance does not have to be changed when running the watt in 50 watt mode, as it is not the same as pulling the outer or inner pair of power tubes as many commonly do to tame 100 watt amps)
This feature is great for getting that driven tube sound at lower volumes!