Iconic amp sounds for your pedalboard. The Silk Drive valve overdrive pedal offers the dynamic clean and creamy overdrive tones of classic boutique amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Inspired by harmonically rich boutique amp tones, the Silk Drive goes beyond the amp-in-a-box category to offer a truly flexible valve overdrive pedal. The all-analog signal path and Nutube allow for genuine boost and overdrive tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analog cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analog design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using

Specifikacija:

• analog preamp with "Nutube" tube technology
• Elegant boutique sound from warm clean to bluesy crunch
• Controls: Gain, Volume, Treble, Middle, Bass
• Bright switch
• OLED display with oscilloscope graphics in real time
• 3 Operating modes for more flexibility: Standard (instrument level)
• Pre-Amp (line level) and Cab Sim (signal for mixer / DAW)
• Input and output: 6.3 mm mono jack
• DC 9 V input
• Link output
• Power supply: 9 V alkaline battery or 9 V power supply (middle = negative)
• Power consumption: 95 mA
• Battery life: approx. 2 hours (when using an alkaline battery), the actual battery life depends on the operating conditions
• Dimensions (W x D x H): 72 x 120 x 55 mm (including switch and rubber pad)
• Weight: 350 g
• Colour: Silver
• Includes 9 V battery for test purposes